|
|
| |
|
Blox Throttle Body
|
BLOX Racing billet throttle bodies are currently available for the Honda and Acura D, B, and H-series engines.
Each unit is precision machined from AL6061 and features new brass throttle plates, stiffer throttle springs and sealed bearings for quick response and smooth operation. These high performance throttle bodies are designed as direct-fit replacements and come in various sizes ranging from 66mm to 76mm openings.
BLOX Racing billet throttle bodies offer increases in airflow characteristics resulting in horsepower and torque gains.
Hardware is included. Reuses stock sensors and throttle cable.
|
Cast Aluminum Tuner Series - 68mm [BXIM-00210]
All Vehicles w/D, B, H Series |
$ 122.00 |
|
Racing Throttle Body 66-76mm [BXIM-002]
All Vehicles w/D, B, H Series |
$ 225.00 |
|
Racing Throttlebody 70-72mm [BXIM-002]
All Vehicles w/K20A-3, Z1 |
$ 306.00 |
|
|
|
| |
|
Blox Throttle Body Adapter for RBC Manifold
|
|
|
K Series RBC Adaptor [BXIM-10300]
All Vehicles w/K Series & RBC Intake Manifold |
$ 43.00 |
|
|
|
| |
|
Hondata Map Sensors
|
|
The Hondata 4 bar map sensor is a plug compatible replacement for the Honda
factory MAP sensor. It is a direct replacement for the B, D, H, F and K-series
Honda engines. This plug in sensor takes less than 60 seconds to install and
eliminates the risk of sensor damage that often occurs when attempting to wire
in other types of MAP sensors.
|
B, D, F, and H Series 4 Bar Map Sensor [HD-BDHF-4BAR] 
All Vehicles w/ B, D, F, and H Series Engines |
$ 130.00 |
|
K Series 4 Bar Map Sensor [HD-K-4BAR]
All Vehicles w/ K Series Engine |
$ 140.00 |
|
|
|
| |
|
Karcepts Intake Manifold Adapters
|
|
BDL 70mm Throttle Body to RBC/RRB/RBB [KC-KlM03]
All Vehicles |
$ 60.00 |
|
BDL 70mm Throttle Body to RBC/RRB/RBB WITH PORTS [KC-KlM04]
All Vehicles |
$ 70.00 |
|
K20A/A2/A3/Z1 Throttle Body to RBC/RRB/RBB [KC-KlM01]
All Vehicles |
$ 60.00 |
|
K20A/A2/A3/Z1 Throttle Body to RBC/RRB/RBB WITH PORTS [KC-KIM02]
All Vehicles |
$ 70.00 |
|
|
|
| |
|
King Motorsports 64mm DBW Throttle Body "Exchange"
|
Stock 06+ Civic Si Throttle Bodies measure approx. 60mm at the throat and 63mm at the entries. King Motorsports offers a service that will punch it out to a whopping 64mm straight through!! The 4mm increase has been proven to make 2-3hp below 6,000 rpm and a hard to beat 4.5hp average from 6,000 rpm and on... Consistent torque increase of 3-5 lb.ft. across the rev range on a completely stock vehicle!!
We have a few cores on the shelf to help and alleviate the down-time associated with sending your throttle body in for our Boring Service. This is a bolt-on affair and can now be made with zero down time!! Simple install and absolutely the best bang for your buck.
Exchange only available when cores are in stock. If the core is out at the time of your order you will be contacted and be placed on a short waiting list. If you rather not wait and you dont mind the vehicle down time you are welcome to send yours in for same prompt service.
KMS Throttle Body Boring Service is only $175.00 with a refundable core charge of $300.00 if you chose to do the exchange. Credit will be applied once we confirm the return of a working core.
|
King Motorsports Pre-Bored Throttle Body [16400RRBA02] 
Civic Type R (2006-2009)
Civic Si (2006-2009) |
$ 475.00 |
|
King Motorsports Pre-Bored Throttle Body [KMSU-TBODY]
Civic (2001-2005) Si
RSX Type S (02-04)
RSX Base (02-07)
RSX Type S (05-07) |
$ 500.00 |
|
|
|
| |
|
King Motorsports K Series Throttle Body IACV Adapter Plate - SPECIAL INTRODUCTORY PRICE
|
|
As the K-Series swap becomes increasingly common, one fitment problem we often hear about is the interference caused by the orientation of the IACV (Idle Air Control Valve) on the cable-style RSX throttle body. The problem is worse yet when an RBC intake manifold is used. There simply is not enough room between the IACV and the radiator.
After substantial R&D, as well as on-vehicle testing, King Motorsports has developed the perfect solution - The KMS IACV Adapter Plate. Our adapter provides up to 1.5" clearance. The advanced design not only gives the required clearance, it keeps the idle as smooth as stock - including trials on a 2.5 litre K Series Hybrid with high compression and big cams.
The King Motorsports Adapter Plate is precision milled from aircraft-quality Aluminum billet for a perfect fit. The unit comes with one OEM O-ring and OEM mounting hardware. Installation requires two O-rings, so use of your existing O-ring is required.
|
KMS K Series Swap Throttle Body Adapter Plate [KMSU-KSWAP-TBA]
All Vehicles w/K Series, Including Swap |
$ 49.00 |
|
|
|
| |
  
|
Kinsler Fuel Injection ITBs
|
Kinsler has been manufacturing some of the best fuel injection systems in the world for decades. They offer them for all B, D, H, F, and K-series cylinder heads. Kinsler offers seven (7) different throttle sizes ranging from: 51mm to 67mm. The Port windows and runners can be CNC machined to match your head so that no additional porting is needed. Standard ITB’s don’t include them but Kinsler does offer an "Upper" rail and second set of injectors (pictured) for competition drag racing.
Other options include cast magnesium or aluminum bodies, custom length spun aluminum ram-tubes, back-cut and hard-chrome plated transverse throttle shafts, aluminum throttle plates, bronze throttle shaft bushings, throttle arms with stop and safety return spring, billet linkage connector bar with ball bearings and snap rings, universal nozzle boss inserts installed in "lower" injector bosses, and 8 AN extruded aluminum fuel rail (12 AN available) with billet mounting stanchions make them the an industry leader in Individual Throttle Body Fuel Injection Systems.
|
B Series - CALL FOR PRICE & DETAILS []
All Vehicles w/B Series - CALL FOR DETAILS |
$ .00 |
|
D Series - CALL FOR PRICE []
All Vehicles w/D Series - Std. Sizes: 1.810", 2", 2 3/16", 2 1/4" |
$ .00 |
|
F & H Series - CALL FOR PRICE []
All Vehicles w/F or H Series - Std. Sizes: 2", 2 1/4", 2 3/16", 2 3/8", 2 7/16"; Optional Sizes: 2 1/2", 2 5/8" |
$ .00 |
|
K Series - CALL FOR PRICE []
All Vehicles w/K Series - Std. Sizes: 2”, 2 1/4”, 2 3/16”, 2 3/8”, 2 7/16”; Optional Sizes: 2 1/2", 2 5/8" |
$ .00 |
|
|
|
| |
|
Professional Products 65mm Throttle Body
|
65mm Throttle Bodies are designed as
an OEM replacement product that bolts on without any modifications. You
can expect increased throttle response and an increase in horsepower by
simply bolting this product on to your car. Will fit all DOHC VTEC B
Series motors.
King Motorsports also offers a Port-Matching Service for those that are
interested in maximizing the potential of a larger throttle body.
|
65mm "Polished" Throttle Body [PP-65P]
Accord (1990-1993)
Accord (1994-1997)
Accord (1998-2002)
Civic (1988-1991)
Civic (1992-1995)
Civic (1996-2000)
CRX (1988-1991)
Del Sol (1993-1997)
Integra (1990-1993)
Prelude (1992-1996)
Prelude (1997-2001)
Integra (1994-2001)
CR-V (1997-2001) |
$ 204.99 |
|
65mm "Polished" Throttle Body w/ TPS [PP-65PTPS]
Accord (1990-1993)
Accord (1994-1997)
Accord (1998-2002)
Civic (1988-1991)
Civic (1992-1995)
CRX (1988-1991)
Del Sol (1993-1997)
Integra (1990-1993)
Prelude (1992-1996)
Prelude (1997-2001)
Integra (1994-2001)
CR-V (1997-2001) |
$ 279.99 |
|
65mm "Satin" Throttle Body [PP-65S]
Accord (1990-1993)
Accord (1994-1997)
Accord (1998-2002)
Civic (1988-1991)
Civic (1992-1995)
Civic (1996-2000)
CRX (1988-1991)
Del Sol (1993-1997)
Integra (1990-1993)
Prelude (1992-1996)
Prelude (1997-2001)
Integra (1994-2001)
CR-V (1997-2001) |
$ 199.99 |
|
65mm "Satin" Throttle Body w/ TPS [PP-65STPS]
Accord (1990-1993)
Accord (1994-1997)
Accord (1998-2002)
Civic (1988-1991)
Civic (1992-1995)
Civic (1996-2000)
CRX (1988-1991)
Del Sol (1993-1997)
Integra (1990-1993)
Prelude (1992-1996)
Prelude (1997-2001)
Integra (1994-2001)
CR-V (1997-2001) |
$ 274.99 |
|
|
|
| |
|
Professional Products 68mm Throttle Body
|
68mm Throttle Bodies are designed as
an OEM replacement product that bolts on without any modifications. You
can expect increased throttle response and an increase in horsepower by
simply bolting this product on to your car. Will fit all DOHC VTEC B
Series motors.
King Motorsports also offers a Port-Matching Service for those that are interested in maximizing the potential of a larger throttle body.
|
68mm "Polished" Throttle Body [PP-68P]
Accord (1990-1993)
Accord (1994-1997)
Accord (1998-2002)
Civic (1988-1991)
Civic (1992-1995)
Civic (1996-2000)
CRX (1988-1991)
Del Sol (1993-1997)
Integra (1990-1993)
Prelude (1992-1996)
Prelude (1997-2001)
Integra (1994-2001)
CR-V (1997-2001) |
$ 214.99 |
|
68mm "Polished" Throttle Body w/ TPS [PP-68PTPS]
Accord (1990-1993)
Accord (1994-1997)
Accord (1998-2002)
Civic (1988-1991)
Civic (1992-1995)
CRX (1988-1991)
Del Sol (1993-1997)
Integra (1990-1993)
Prelude (1992-1996)
Prelude (1997-2001)
Integra (1994-2001)
CR-V (1997-2001) |
$ 289.99 |
|
68mm "Satin" Throttle Body [PP-68S]
Accord (1990-1993)
Accord (1994-1997)
Accord (1998-2002)
Civic (1988-1991)
Civic (1992-1995)
Civic (1996-2000)
CRX (1988-1991)
Del Sol (1993-1997)
Integra (1990-1993)
Prelude (1992-1996)
Prelude (1997-2001)
Integra (1994-2001)
CR-V (1997-2001) |
$ 209.99 |
|
68mm "Satin" Throttle Body w/ TPS [PP-68STPS]
Accord (1990-1993)
Accord (1994-1997)
Accord (1998-2002)
Civic (1988-1991)
Civic (1992-1995)
Civic (1996-2000)
CRX (1988-1991)
Del Sol (1993-1997)
Integra (1990-1993)
Prelude (1992-1996)
Prelude (1997-2001)
Integra (1994-2001)
CR-V (1997-2001) |
$ 284.99 |
|
|
|
| |
|
Skunk2 70mm Billet K Series Throttle Body
|
Skunk2 Billet 70mm Throttle Bodies for the K Series are finally here... Get yours today inventory is limited!!
$399.99 Shipped
|
Skunk2 70mm K Series Throttle Body [S2309-05-0080]
All Vehicles |
$ 367.99 |
|
|
|
| |
|
Skunk2 74mm Black Anodized K Series Billet Throttle Body
|
|
Now taking orders.
Arriving soon - the new 74mm black throttle body from Skunk2. The ultimate in performance and appearance.
Order now, they're going to go fast!
|
Skunk2 74mm Black K Series Throttle Body [S2-BLTB-74MM]
All Vehicles w/K Series |
$ 367.99 |
|
|
|
| |
|
Throttle Body Boring
|
|
King Motorsports Big Bore Throttle Body Boring Service starts with your core. The throttle body is completely disassembled, bead blasted with ultra fine media and then cleaned. The throttle body is then set-up on the lathe where it is bored to it's final dimension.
King measures each body at the throat because it is the most important number... many other companies advertise the size at the entry because it is larger but the truth is they cannot get away with anymore than we can. A new throttle plate is cut from brass and then carefully fitted to the body. The throttle stop is set and a OEM Spec. Moly Based paint is applied to achieve a factory like seal and all sensors it was shipped with are re re-installed.
Results will vary but you can expect similar results to those listed below:
D Series = 59-60mm
B Series = 62-65mm
H & F Series = 65-66mm
K Series = 64.5-66mm
F Series = 63-64mm
We typically turn throttle bodies around in two days. If time is of the essence... we suggest contacting us in advance for an ETA.
  |
Throttle Body Boring (A) [KMSU-TBODY]
All Vehicles Cable Actuated (Excl. NSX) |
$ 150.00 |
|
Throttle Body Boring (B) [KMSU-TBODY-B]
All Vehicles NSX & Drive By Wire |
$ 175.00 |
|
|
|
| |
|
TODA Sports Injection Kit
|
|
Sports Injection Kit for B-Series Engine [16.TD.SIB16A]
Civic (1996-2000) Si
Del Sol (1993-1997) DOHC VTEC
Integra (1990-1993) GSR
Integra (1994-2001) Type R |
$ 2,900.00 |
|
Sports Injection Kit for B-Series Engine (GSR) [16.TD.SIB1BC]
Integra (1994-2001) GSR |
$ 2,900.00 |
|
Sports Injection Kit for NSX [16.TD.SIC32B]
NSX (1990-2005) |
$ 10,500.00 |
|
Sports Injection Kit for S2000 [16.TD.SIF20C]
S2000 (2000-2003)
S2000 (2004-2008) |
$ 3,150.00 |
|
|
|
