|
|
|
|
|
|
Page: 1 2  |
|
New Arrivals
Each BLOX Racing coilover system is designed with specifically matched spring rates and shock valving to offer enthusiasts unparalleled handling characteristics, while maintaining suitable ride comfort and quality.
The Tuner Series is designed to meet the needs and demands of daily driving and high performance weekends at the track.
The Competition Series is designed for the rigors of high performance road course driving and racing. Enthusiasts are able to fine-tune and maximize their suspension setup by easily adjusting their vehicle’s ride height and corner weights.
The Lower Control Arms and the proven Blox design anodized in Blue.
|
Available for the first time in 2 years!
The Quaife QSR quick ratio rack and pinion gear set is perhaps the most underrated performance part around.
The Quaife rack and pinion gears simply replace the existing pieces inside your stock steering rack housing. You'll beneift from more rapid steering response - with an average 25 percent reduction in ratio, resulting in fewer turns lock-to-lock This translates into much quicker steering and turn in, with only a slight increase in steering effort.
The Quaife QSR is a must for autocross, drifting, and track days. Designed to fit manual steering racks only. Not for power steering. |
Available for both the EG and EK platforms, Buddy Club USA is proud to announce the release of the P1 Racing Lower Control Arms. The P1 Racing LCA retains factory suspension geometry, but weighs only 2 lbs. thanks to aircraft grade 7075-T6 Aluminum. To make the P1 Racing Lower Control Arms virtually maintenance free, we manufactured our own P1 low-deflection bushings, durable enough to withstand the rigors of motorsports much like spherical bearings but with no noise, which makes them ideal for street driving as well.
The provided mounting areas allow for factory and aftermarket sway barfitment. The Buddy Club P1 Racing Lower Control Arms are hard anodized for corrosion resistance in 2 colors, black and titanium. With the P1 Racing Lower Control Arms you’ll get a more tunable, predictable and stable driving experience. |
The Buddy Club P1-RACING Camber Kit is specifically designed for the 2006+ Civic Si double-A suspension. Sophisticated design makes alignment more accurate and with the camber angle adjustment, your car will be more stable on the straight and exhibit better control in the corner.
Buddy Club manufactures these camber kit by combining lightweight, high strength materials with a precise manufacturing process. Utilizing many years of racing experience and thorough research and development,
this camber kit offers excellent performance and quality. |
Offering unsurpassed quality and durability, this King Motorsports 5.02 Final Drive will bolt in to any K Series MT. This unit is a Grand-Am homologated gear set and is available with WPC coating for an additional charge. |
Now In Stock - Special Introductory Pricing - Save $100!
That's right, not only is this much-anticipated Mugen system on its way, it's also on sale! For a limited time King Motorsports is offering this newly-released exhaust system for $1499 - saving you $100.
As with all Mugen systems, the 8th Gen Coupe setup is perfect in fit, finish, sound and performance. All stainless steel construction, perfect mandrel bends and finished with a polished tip with the Mugen logo laser etched into it. The piping is 60mm and both the front silencer and unique 3-sided rear muffler are perfectly constructed from stainless steel.
And the sound is all Mugen - deep and throaty when you're on the throttle, mellow at cruising speed. No droning or rasping, just that signature Mugen tone.
|
As the K-Series swap becomes increasingly common, one fitment problem we often hear about is the interference caused by the orientation of the IACV (Idle Air Control Valve) on the cable-style RSX throttle body. The problem is worse yet when an RBC intake manifold is used. There simply is not enough room between the IACV and the radiator.
After substantial R&D, as well as on-vehicle testing, King Motorsports has developed the perfect solution - The KMS IACV Adapter Plate. Our adapter provides up to 1.5" clearance. The advanced design not only gives the required clearance, it keeps the idle as smooth as stock - including trials on a 2.5 litre K Series Hybrid with high compression and big cams.
The King Motorsports Adapter Plate is precision milled from aircraft-quality Aluminum billet for a perfect fit. The unit comes with one OEM O-ring and OEM mounting hardware. Installation requires two O-rings, so use of your existing O-ring is required. |
 Now taking orders.
Arriving soon - the new 74mm black throttle body from Skunk2. The ultimate in performance and appearance.
Order now, they're going to go fast! |
|
Headlines
2.4.2010
|
|
1.25.2010
|
|
1.18.2010
|
|
1.17.2010
|
|
1.16.2010
|
|
1.13.2010
|
|
11.25.2009
|
|
11.13.2009
|
|
11.12.2009
|
|
10.13.2009
|
|
10.5.2009
|
|
9.30.2009
|
|
9.23.2009
|
|
9.10.2009
|
|
9.10.2009
|
|
|
| |
|
 |
|
Copyright © 1998 - 2006 King Motorsports Unlimited, Inc.
|
Created by Solid Forge
|