CT Engineering


CT Engineering Adjustable Swaybar Kit
This product fits:
  • NSX (1990-2005)
(read more...)
Price: $399.00
CT Engineering Axle-Back Exhaust System for 04-07 TL
Adds 8hp at the wheels
T-304 stainless steel cat back exhaust system
Dual polished stainless steel mufflers
Dual 4" polished resonated tips
Center section is 2.5" diameter with a polished stainless steel resonator
Installation time: 1 hour


This product fits:
  • TL (1995-2003)
  • TL (2004-2008)
(read more...)
Price: $1,095.00
CT Engineering Axle-Back Exhaust System for 09-10 TL & TL SHAWD
Rear Axle-Back Exhaust (pair)
Fully polished Stainless-Steel mufflers
Dual 3.5" Polished Stainless-Steel Resonated tips on each side
 TIG Welded by hand at our facility in California
Adds a nice smooth tone, with very minimal resonance, and a dyno tested 6-8 wheel hp
Installation Time:  About an hour and a half.
This product fits:
  • TL (2009+)
(read more...)
Price: $969.00
CT Engineering Cat-Back Exhaust System - NSX
This product fits:
  • NSX (1990-2005)
(read more...)
Price: $1,149.00
CT Engineering Drop-In Air Filter
This product fits:
  • Integra (1994-2001)
(read more...)
Price: $59.00
CT Engineering Drop-In Air Filter
This product fits:
  • NSX (1990-2005) 1991-2003 Only
(read more...)
Price: $59.00
CT Engineering Drop-In Air Filter
This product fits:
  • S2000 (2000-2003)
  • S2000 (2004-2009)
(read more...)
Price: $59.00
CT Engineering Front Camber Adjusters - Civic 8th Gen
Contains 1 pair (both sides)
Adjustment Range:  Camber -1.750 to +1.750
This product fits:
  • 2006-2011 8th Gen Honda Civic 06-07
  • 2006-2011 8th Gen Honda Civic Si 06-07
(read more...)
Price: $29.00
CT Engineering Front Camber Adjusters - RSX
Contains 1 pair (both sides)
Adjustment Range:  Camber -1.750 to +1.750
This product fits:
  • RSX Base (2002-2006)
  • RSX Type S (2002-2004)
  • RSX Type S (2005-2006)
(read more...)
Price: $29.00
CT Engineering Front Camber Adjustment Ball Joint
Replacement front upper ball joint
Offset for range of +/-1.5* or anywhere in between
For cars lowered up to 1.5"
SOLD INDIVIDUALLY  (One kit per wheel)
Installation time: 45 min each +/-

NOTE: On the S2000 these ball joints can be used for front and rear.
This product fits:
  • 1995-2003 Acura CL 2001-2003 CL-S Only
  • 1998-2002 Honda Accord 1999-2000 Only
  • S2000 (2000-2003)
  • S2000 (2004-2009)
  • TL (1995-2003) 1999-2003 TL & TL-S Only
(read more...)
Price: $99.00
CT Engineering Front Lower X Brace
This product fits:
  • S2000 (2000-2003)
  • S2000 (2004-2009)
(read more...)
Price: $369.00
CT Engineering Header - NSX
Mandrel Bent T-304 Stainless Steel Tubing
CNC Machined Flanges
All TIG welded for durability and appearance
18 hp. gain at the wheels
50 State Street Legal
CARB legal for street use in California
Installation time:  4 hours +/-
This product fits:
  • NSX (1990-2005)
(read more...)
Price: $1,499.00
CT Engineering Header - TSX 04-08
This product fits:
  • TSX (2004-2008)
(read more...)
Price: $779.00
CT Engineering Rear Camber Adjuster - Civic 8th Gen
SOLD INDIVIDUALLY
This rear arm is easily adjustable with a cam bolt
Mounting bracket can be positioned in two different locations to increase the amount of camber change available
Aircraft quality Billet Aluminum Construction
Silver finish
Adjustment Range:  Camber -3.00 to +3.00
Installation time:  .5 hr/side +/-
This product fits:
  • 2006-2011 8th Gen Honda Civic 06 Only
  • 2006-2011 8th Gen Honda Civic Si 06 Only
(read more...)
Price: $169.00
CT Engineering Rear Camber Adjuster - RSX
Rear Camber Adjusters with rubber bushings
Sold each - 2 required per car
This product fits:
  • RSX Base (2002-2006)
  • RSX Type S (2002-2004)
  • RSX Type S (2005-2006)
(read more...)
Price: $89.00
CT Engineering Rear Camber Adjuster - TL
Camber adjuster-rear (-1.5 to +3 deg.)
Uses a rubber bushing at inner mounting point
Installation time:  1 hour +/-
One adjuster needed per wheel (2 required per car)
This product fits:
  • TL (2004-2008) 2004-2006 Only
(read more...)
Price: $89.00
CT Engineering Rear Camber Adjuster - TSX & Accord
Camber adjuster-rear (-1.5 to +3 deg.)
Uses a rubber bushing
SOLD INDIVIDUALLY (One kit per wheel)
Installation time:  1/2 hour +/-
This product fits:
  • 2003-2007 Honda Accord
  • TSX (2004-2008)
(read more...)
Price: $89.00
CT Engineering Rear Lower Tie Bar
This product fits:
  • Integra (1994-2001)
(read more...)
Price: $219.00
CT Engineering Rear Lower Tie Bar
This product fits:
  • RSX Type S (2002-2004)
(read more...)
Price: $79.00
CT Engineering Rear Lower Tie Bar
This product fits:
  • S2000 (2000-2003)
  • S2000 (2004-2009)
(read more...)
Price: $149.00
Loading...