Oil Filters & Lubrication

  • Genuine Honda Oil Filter
    Price: $9.00
  • Genuine Honda Oil Filter
    Price: $14.00
  • Honda Power Steering Fluid
    Price: $5.25
  • Hondabond HT
    Price: $14.95
  • Hondalock Thread Lock - High Strength
    Price: $2.99
  • Hondalock Thread Lock - Low Strength
    Price: $2.99
  • Hondalock Thread Lock - Medium Strenght
    Price: $2.99
  • Mugen High Performance Oil Filter - All Honda/Acura Except S2000
    Mugen High Performance Oil Filter

    Fits All Honda/Acura Except S2000

    The filtering range and position of the filter are optimized in order to eliminate sludge deposits as much as possible, as a result reduces the low pressure loss (improved by 10%) while significantly increasing the high temperature resistance capability. By adopting a “Y” shape internal filter, which efficiently traps sludge on the filtering fibers MUGEN engineers have been successful in reducing the amount of harmful contaminants re-entering the engine lubrication system. Because of the materials, anti-heat acrylic rubber (gasket) and silicon rubber (anti-drain), this oil element functions without any problems in the high temperature condition of the engine.

    Price: $36.00
  • Radium S2000 Catch Can Kit (00-05 LHD)
    Radium S2000 Catch Can Kit (00-05 LHD)
    This installation kit was specifically designed for the 00-05 Honda S2000 LHD chassis. It is not compatible with any RHD or 06-09 LHD S2000 models. No worries, we have a separate catch can kit specifically for these S2000 models. If you would like to order without the Petcock Drain Kit please give us a call. 

    An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance.

    S2000 CATCH CAN KIT OPTIONS
    Radium Engineering offers two completely independent S2000 oil catch can kits that are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems route clean filtered air back in through the engine to be burned and to promote negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors into the cabin. The 20-0092 Crankcase Catch Can Kit (shown below) runs inline with the 1/2" valve cover breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe. If the engine is turbocharged or supercharged and you are finding oil accumulation stuck in the intercooler, this catch can is a necessity as oil will lower the thermal efficiency properties of the heat exchange process.

    The 20-0093 PCV Catch Can Kit runs inline with the 3/8" PCV (positive crankcase ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: Because the Radium catch cans are pressure sealed, they are great for boosted applications as well so connecting to the intake manifold is permitted.

    For the ultimate in engine protection, Radium recommends the S2000 20-0096 Dual Catch Can Kit which utilizes both the "crankcase vent" catch can (foreground) and "PCV" catch can (background).
    Price: $209.95
  • Radium S2000 Catch Can Kit (RHD/06-09 LHD)
    Radium S2000 Catch Can Kit (RHD/06-09 LHD)
    This installation kit was specifically designed for the 00-09 RHD and 06-09 LHD Honda S2000. It is not compatible with 00-05 Honda S2000 LHD models unless the cruise control module is removed. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance.

    Features:
    -Effectively raises the octane and increased engine performance from cleaner inlet air
    -Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc.
    -Excessive oil collection can be an indicator of a damaged engine.
    -Lowers hydrocarbon emissions
    -Capacity: 6 fluid ounces
    -Height (without fittings): 5 inches
    -Outside Diameter: 2.45 inches
    Price: $219.95
  • Red Line 10W30
    Price: $17.00
  • Red Line 20W50
    Price: $17.00
  • Red Line 40WT
    Price: $28.00
  • Red Line 5W20
    Price: $17.00
  • Red Line 5W30
    Price: $17.00
  • Red Line Engine Break-In Lube
    Price: $13.49
Loading...